Mellanox Technologies MSX6536-10R Hardware Installation Manual page 83

InfiniBand Switch Platform Hardware User Manual
5. Select the image to boot.
For more detailed instructions concerning MLNX-OS® software see the Mellanox
MLNX-OS® SwitchX® Software WebUI User's Manual or the Mellanox MLNX-OS®
SwitchX® Software User Manual.
Mellanox Technologies
U-Boot 2009.01-mlnx1.4 (May 12 2010 - 14:08:15)
CPU: AMCC PowerPC 460EX Rev. A at 1000 MHz (PLB=200, OPB=100,
EBC=100 MHz)
Security/Kasumi support
Bootstrap Option H - Boot ROM Location I2C (Addr 0x52)
Internal PCI arbiter disabled
32 kB I-Cache 32 kB D-Cache
Board: Mellanox PPC460EX Board
FDEF: No
I2C: ready
DRAM: 2 GB (ECC enabled, 400 MHz, CL3)
FLASH: 16 MB
NAND: 1024 MiB
PCI: Bus Dev VenId DevId Class Int
PCIE0: link is not up.
PCIE1: successfully set as root-complex
01 00 15b3
Net: ppc_4xx_eth0, ppc_4xx_eth1
Hit Ctrl+B to stop autoboot:
Mellanox FabricIT
Boot Menu:
1. EFM_PPC_M460EX EFM_1.1.1000 2010-06-24 16:32:03 ppc
2. EFM_PPC_M460EX EFM_1.1.1200
3. U-Boot prompt
Choice:
bd34 0c06 00
0
2010-06-25 18 :00:03 ppc
83