Table of Contents
Advertisement
Rev 1.1
Power, Fan, and System LEDs
Table 3 - System Status LED Assignments
LED Configuration
Solid Green
Flashing Green
Solid Yellow
Solid Red
Off
2.1.1.2 Fan Status Indicators
The indicator is located to the left of the connectors on the connector side panel.
The LED indicator on the Fan Module is on the right side of the module.
14
Mellanox Technologies
1
PS1
EXT 1
PS2
UID
RST
OK – The system is up and running.
The system is booting up. This assignment is valid on managed systems only.
To be implemented in a future SW release.
Major Error – Possible damage can result to the switch. Turn off immediately.
e.g. bad firmware, can't boot, overheated
Off – The system has no power.
Figure 5: Fan Status LED Connector Side
This is a two color LED
Green — OK
Red — Major fault
PS1
PS2
Off — No power to the fans
UID
RST
2
EXT 2
STATUS/ System Health LED
Basic Operation
3
EXT 3
Advertisement
Table of Contents
