Co Line Alternate Route - Comdial DX-80 Installation & Maintenance Manual

CO Line Alternate Route

CO Line Alternate Route works with the DX-80 system CO Line Groups. When this feature is invoked users may be
routed over CO Line groups that they did not necessarily access. This feature is useful in high traffic environments
when the use of secondary and tertiary CO Line selections may periodically be required.
When a user accesses a CO Line Group and all of the CO Lines in this group are in use, the user is automatically
ported-over to the defined secondary and then to the defined tertiary CO Line group. Special handling of calling is
accommodated with Delete Digits and Insert Digits to actuate any CO Line specific call handling required on the
secondary and tertiary CO Lines if used with the telephone number dialed.
Related Features
CO Group
Related Programming
CO Line - CO Group
CO Line Application - Alternate CO Group
Operation
Dial access (or press pre-programmed Flexible Feature Button) to the primary CO Line group for placing the
call. If this CO Line Group is unavailable another will be selected according to the Alternate Group
programming.
Conditions
a) When CO Lines in all groups are busy, busy tone will be heard and a busy message will be displayed in the
LCD.
b) A user may invoke callback to the first selected CO Line group by pressing the [
Default Settings
All CO Line Groups are set as follows for Alternate assignments:
CO Line Application – Alternate CO Line Group 1 is set to 0 (no alternate).
CO Line Application – Alternate CO Line Group 2 is set to 0 (no alternate).
CO Line Application – Alternate CO Line Group 1 & 2 – Delete Digits is set to 0 (delete nothing).
CO Line Application – Alternate CO Line Group 1 & 2 – Inserted Digits" is set to Empty (insert nothing).
Programming Abstract
•
Program the CO Group for an alternate route (via another group) if required.
•
Program the Alternate Route for digit insertion/deletion as required to place the dialed call over the selected
alternate route.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
Program CO Line Groups for Alternate CO Line Groups (Index 07-01-xx-03, where "xx" = the CO Line
Group for which Alternate Routing must be setup):
•
Input 07-01-xx-03 to program Alternate Routing for CO Line Group "xx."
save
•
Press [ ]. This advances to Alternate CO Group.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
3-57
M M 03/01
AINTENANCE ANUAL
CO Line Class of Service
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
cbck
] button.