Setting Up The Measurements For Display - GE TransPort PT900 User Manual

Chapter 5. Measurements

5.2 Setting Up the Measurements for Display

The PT900 APP can display up to 10 different variables at the same time. To set up
your display screen, click the EDIT button at the top right of the measurement
screen to open the SET UP MEASUREMENTS menu, as shown in Figure 90 below.
To set up your display measurements, complete the following steps:
1. Open the drop-down list in the CHANNEL box and select either CH1 , CH2 ,
Average
2. Open the drop-down list in the MEASURE box and select the desired
measurement variable from the list (see Table 12 on page 93 for the
options).
92
Figure 90: Set Up Measurements Menu
or General as the channel to be displayed.
®
TransPort PT900 User's Manual