Operation
Deleting all data set
You can delete all data sets if you no longer need them.
– Select the function DELETE.
H Note:
Double assignment of the function DELETE/DELALL.
Press the corresponding key
between the functions.
5-36
repeatedly to toggle
Issue 01, 04/2005
– Use the right-hand rotary knob to set it to on. The
measurement line will then prompt: Delete all data
sets?
– Confirm by pressing the corresponding key
more time (all other keys would abort the process).
All data sets are now deleted. The function DELETE is
automatically reset to off.
Recalling a stored data set
You can recall a stored data set; your instrument will
then be provided with all the test-relevant technical
features that existed at the moment of the setup. A
frozen display of the stored A-scan appears.
A
Attention:
If a saved data set is loaded, the current instrument
setup is lost. If necessary, save the current instrument
setup to a new data set before loading a saved data
set.
– Select the function SET-#.
Data saving (function group MEM)
one
Krautkramer USM 35X