6.4 Wireless General Setup
The main setup Client Bridge connection to AP Station and Repeater AP functions setting, MAC filter,
WMM and 802.11r/802.11k Fast Roaming etc in wireless menu.
6.4.1
Radio 0(2.4G) Basic Setup
Administrator can change the data transmission, channel and output power settings for the system.
Station Mode: If Client Bridge want to use 2.4G link to Access Point then administrator can
enable the function (radio 0).
Country: Administrator can select country used channel by US and EU.
Band Mode: Select an appropriate wireless band; bands available are 801.11 b/g/n mixed
mode.
When the upper limit of the 2.4G frequency is used,
the repeater AP will only be able to use the other two
5G extension Repeater AP APs. If the upper end AP
with a Radio 1 (5G) frequency is used, the repeater AP
will only Use 2.4G as the extension Repeater AP base.
V4.0