D Editing A Memory Keyer - Icom ic-7700 Instruction Manual

D Editing a memory keyer

/
123 Symbol ABC
Ω ≈
F-1
F-2
• Memory keyer edit screen
• Example— entered "QSL TU DE JA3YUA TEST"
into memory keyer channel 3
• Pre-programmed contents
CH
M1 CQ TEST CQ TEST DE ICOM ICOM TEST
M2 UR 5NN✱ BK
M3 CFM TU
M4 QRZ?
DEL SPACE
F-3 F-4
EXIT/SET
M1..M4
F-7
Contents
RECEIVE AND TRANSMIT
The contents of the memory keyer memories can be
set using the memory keyer edit menu. The memory
keyer can memorize and re-transmit 4 CW key codes
for often-used CW sentences, contest serial num-
bers, etc. Total capacity of the memory keyer is 70
characters per memory channel.
• Programming contents
q During CW mode operation, push [KEYER]
to select memory keyer screen.
w Push EXIT/SET
push [EDIT] F-2
• Memory keyer contents of Channel 1 (M1) is selected.
e Push [M1..M4]
sired memory keyer channel to be edited.
r Push [ABC]
(MF6)
to select the character group, then rotate the main
dial to select the character, or push the keypad for
number input.
• [Symbol] appears when [123]
"123" character group is selected.
• Selectable characters (using the main dial);
Key selection
ABC
123
Symbol
NOTE:
" " is used to transmit a string of characters with
^
no inter-character space. Put "
string such as ^AR, and the string "
with no space.
" " is used to insert the CW contest serial
✱
number. The serial number automatically incre-
ments by 1. This function is only available for
one memory keyer channel at a time. Memory
keyer channel M2 used "
✔ For your convenience
When a PC keyboard is connected to [USB] con-
nector on the front panel, the memory keyer con-
tents can also be edited from the keyboard.
t Push [t]
F-1
backwards or forwards, respectively.
• P u s h i n g [ D E L ]
[SPACE] inserts a space.
F-4
y Repeat steps r and t to input the desired char-
acters.
u Push EXIT/SET
4-9
to select memory keyer menu, then
to select keyer edit screen.
F-7 several times to select the de-
or [123] or [Symbol]
(MF7)
is pushed when
(MF7)
Editable characters
A to Z (capital letters)
0 to 9 (numbers)
/ ? ^ . , @ ✱
" before a text
^
" by default.
✱
or [u] to move the cursor
F-2
d e l e t e s a c h a r a c t e r a n d
F-3
twice to return normal screen.
4
F-3
(MF7)
" is sent
ar