Display Set Mode - Icom IC-7800 Instruction Manual

12
SET MODE

■ Display set mode

Adjusts the LCD unit brightness within 0 (dark) to
100% (bright) range in 1% steps. (default: 50%)
Adjusts the switch indicators brightness within 1 (dark)
to 100 (bright) range in 1 steps. (default: 80)
Selects the desired display type from A, B and C.
(default: A)
Selects the desired font for frequency readout from
Italic (1), Italic (2), Italic (3), Italic (4), Round (1),
Round (2), Round (3), Shadow (1), Shadow (2),
Shadow (3), Qubic (1), Qubic (2), Qubic (3), Qubic
(4), IC-780 (1), IC-780 (2), IC-780 (3) and IC-780 (4).
(default: Italic (1))
Selects the desired font for the indications other than
frequency readout from Normal and Slim.
(default: Normal)
Selects the desired S/RF meter type during normal
screen indication from Standard, Edgewise and Bar.
(default: Standard)
Selects the desired S/RF meter type during wide
screen or mini scope indication from Edgewise and
Bar. (default: Edgewise)
Turns the meter peak hold function ON and OFF.
(default: ON)
This function is used for the bar meter only.
12-11