Clock And Timers; Setting The Current Time; Setting Power-On Time - Icom IC-756PRO Instruction Manual

8

CLOCK AND TIMERS

Setting the current time

The transceiver has a built-in 24-hour clock with
power-off and power-on timer functions. This is use-
ful when logging QSO's and so on. The clock indica-
tion is always displayed except after pushing [F-INP].
q Push [EXIT] one or more times to close a multi-
function screen, if necessary.
w Push [(F-5)SET] then [(F-3)TIME] to enter timer
set mode.
e Push [(F-1)Y] or [(F-2)Z] to select the time adjust-
ment item.
qr≥qot≥pp

Setting power-on time

The transceiver can be set to turn ON automatically
at a specified time.
q Push [EXIT] one or more times to close a multi-
function screen, if necessary.
w Push [(F-5)SET] then [(F-3)TIME] to enter timer
set mode.
e Push [(F-1)Y] or [(F-2)Z] to select the power-on
time item.
62
qw pp
qr≥wpt≥pp
r Set the current time using the tuning dial.
• "TIME–set push [SET]" blinks.
qr≥qot≥pp
qr≥wpt≥pp
t Push [(F-4)SET] to enter the set time.
• Push [EXIT] to cancel the setting.
qr≥qot≥pp
qr≥wpt≥pp
y Push [EXIT] twice to exit timer set mode.
r Set the desired power-on time using the tuning
dial.
• "TIMER–set push [SET]" blinks.
t Push [(F-4)SET] to enter the set time.
• Push [EXIT] to cancel the setting.
y Push [EXIT] twice to exit timer set mode.
qw pp
Set time appears.
qt wr