Media Configuration Menu - Cisco 7975G Software Manual

Device Configuration Menu
Table 4-12 UI Configuration Menu Options (continued)
Option
Wideband Headset UI
Control
Personalization
Single Button Barge

Media Configuration Menu

The Media Configuration menu displays whether the headset, speakerphone, and video capability are
enabled on the phone. This menu also displays options for recording tones that the phone may play to
indicate that a call may be recorded.
Table 4-13 Media Configuration Menu Options
Option
Headset Enabled
Headset Hookswitch
Control Enabled
Speaker Enabled
Video Capability
Enabled
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
4-20
Description
Indicates whether the user can configure the
Wideband Headset option in the phone user
interface.
Values:
Enabled—The user can configure the
•
Wideband Headset option in the Audio
Preferences menu on the phone (choose
> User Preferences > Audio
Preferences> Wideband Headset).
Disabled—The value of the Wideband
•
Headset option in Cisco Unified
Communications Manager Administration
gets used (see Media Configuration Menu,
page 4-20).
Default: Enabled
Indicates whether the phone has been enabled
for configuring custom ring tones and wallpaper
images.
Indicates whether the Single Button Barge
feature is enabled for the phone.
Default: Disabled.
Description
Indicates whether the Headset button is enabled
on the phone.
Indicates whether the wireless headset
hookswitch feature is enabled on the phone.
Indicates whether the speakerphone is enabled
on the phone.
Indicates whether the phone can participate in
video calls when connected to an appropriately
equipped computer.
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
To Change
Use Cisco Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Table 4-13 describes the options on this menu.
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
OL-15790-01