Media Configuration Menu - Cisco 7965G Administration Manual

Device Configuration Menu

Media Configuration Menu

The Media Configuration menu displays whether the headset, speakerphone, and video capability are
enabled on the phone. This menu also displays options for recording tones that the phone may play to
indicate that a call may be recorded.
Table 4-12 Media Configuration Menu Options
Option Description
Headset Enabled Indicates whether the Headset button
is enabled on the phone.
Speaker Enabled Indicates whether the speakerphone is
enabled on the phone.
Video Capability Indicates whether the phone can
Enabled participate in video calls when
connected to an appropriately equipped
computer.
Recording Tone Indicates whether a recording tone
(often referred to as a beep tone) is
enabled or disabled for the phone. If the
recording tone option is enabled, the
phone plays the beep tone in both
directions of every call, regardless of
whether the call actually gets recorded.
The beep tone first sounds when a call
is answered.
You may want to notify your users if
you enable this option.
Default: Disabled
Related Parameters:
•
•
•
Other related parameters—Beep tone
frequency in hz, the length of the beep
tone (called duration), and how often
the beep tone plays (called
interval)—are defined on a
per-Network Locale basis in the xml
file that defines tones. This xml file is
usually named tones.xml or
g3-tones.xml.
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 6.0
4-22
Recording Tone Local Volume
Recording Tone Remote Volume
Recording Tone Duration
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Table 4-12 describes the options on this menu.
To Change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
OL-12650-01