Media Configuration Menu - Cisco 7975G Software Manual

Media Configuration Menu

Option
Enbloc Dialing
(SCCP only)
Media Configuration Menu
The Media Configuration menu displays whether the headset, speakerphone, and video capability (SCCP
phones only) are enabled on the phone. This menu also displays options for recording tones that the phone
may play to indicate that a call may be recorded. The following table describes the options on this menu.
Table 24: Media Configuration Menu Options
Option
Headset Enabled
Headset
Hookswitch
Control Enabled
(for Cisco Unified
IP Phone 7975G,
7965G, and
7945G)
Speaker Enabled
Video Capability
Enabled
(SCCP phones
only)
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
96
Description
Indicates whether the phone will use Enbloc
dialing. If "Enabled", the phone uses Enbloc
dialing when possible. If "Disabled", the phone
does not use Enbloc dialing. You should
disable Enbloc dialing if either Forced
Authorization Codes (FAC) or Client Matter
Codes (CMC) dialing is in use.
Default: Enabled
Description
Indicates whether the Headset
button is enabled on the phone.
Indicates whether the wireless
headset hookswitch feature is
enabled on the phone.
Indicates whether the speakerphone
is enabled on the phone.
Indicates whether the phone can
participate in video calls when
connected to an appropriately
equipped computer.
Cisco Unified IP Phone Settings
To change
From Cisco Unified Communications
Manager Administration, choose
Device > Phone > Phone
Configuration.
To change
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone > Phone
Configuration.