Specifying An Operation Mode, Using Parameters - Toshiba TOSVERT VF-FS1 Instruction Manual

5.2

Specifying an operation mode, using parameters

 : Parameter setting macro function
• Function
Automatically programs all parameters (parameters described below) related to the functions by selecting
the inverter's operating method.
The major functions can be programmed simply.
[Parameter setting]
Title

Note: When this parameter is invoked after it has been set,  is always displayed (on the right side).
5
The number on the left side refers to the number specified previously.
Example 
Automatically programmed functions and parameter set values
Relational
parameter


 (Always)
 (F)
 (R)
 (RES)

⇒ See K-14 for input terminal functions.
Disabled (=)
The parameter does nothing. Even if set to ,  will not return the setting you made to its factory
default.
Function
Parameter setting macro function
Default setting 1: Coast stop
value
0: Terminal board 0: Terminal board
1: VIA 1: VIA
1: ST 0: Disabled
2:F 2:F
3:R 1:ST
10: RES 10: RES
0 (%) -
Adjustment range
0: Disabled
1: Coast stop
2: 3-wire operation
3: External input UP/DOWN setting
4: 4-20mA current input operation
2: 3-wire 3: External input
operation UP/DOWN
setting
0: Terminal board 0: Terminal board
5: UP/DOWN
from external
1: VIA
contact
1: ST 1: ST
2:F 2:F
49:HD 41:UP
10: RES 42:DOWN
- -
E-4
E6581381
Default setting
0:
4: 4-20mA
current input
operation
0: Terminal board
1: VIA
1: ST
2:F
6:S1
10: RES
20 (%)