Applied Operation; Setting The Operation Frequency - Toshiba TOSVERT VF-FS1 Instruction Manual

7. Applied operation

Applied operation can be performed by selecting the frequency mode and command mode setting. However in
case the LOCAL mode is selected by
command mode are fixed operation panel key setting mode. The following explanations are applied REMOTE
mode only.
7.1

Setting the operation frequency

Applied operation can be performed by selecting the inverter frequency setting. To make settings for applied
operation, use the basic parameter  (selection of frequency setting mode 1), and the extended
parameters  (frequency priority selection) and  (selection of frequency setting mode 2).
(1) Operation panel key setting
F
R
RES
CC
PLC
PP
VIA
VIB
CC
:
:
Enter the number with the operation panel keys, then
press the
LOC key (lighting a LOC/REM lamp), frequency setting mode and
REM
RUN STOP
key to conform. (Save the setting)
ENT
(2) External potentiometer setting
:
:
Use the parameters  to  for this setting.

G-1
E6581381
VIA
F
R
RES
CC
SW3
PLC
PP
VIA
VIB
CC
RUN STOP
V
7