Toshiba TOSVERT VF-FS1 Instruction Manual page 128

6.12.2 Instantaneous power failure coast stop selection
 : Instantaneous power failure coast stop selection
• Function
[Parameter setting]

[If momentary power failure occurs]
6
Coast stop in the event of momentary power failure: If a momentary power failure occurs during
operation, the inverter coast stops forcibly. When operation is stopped, the message "  " is
displayed (alternately) on the operation panel.
After the forced coast stop, the inverter remains static until you put off the operation command
momentarily.
Title Function
Instantaneous power failure coast stop
selection
Input voltage
Motor speed
Adjustment range
0: Disabled
1: - (Do not select)
2: Coast stop
F-36
E6581381
Default setting
0