Toshiba TOSVERT VF-FS1 Instruction Manual page 168


f703


*
6
When f703 was set, f702 functions only PID control parameters. And the adjustment range fc is
changed from 0.0Hz to fh . Therefore, You must set value of maximum frequency in ul .
Title Function
Frequency free unit
magnification
Frequency free unit
conversion selection
Inclination
characteristic of free
unit display
Bias of free unit
display
The  to  converts the following parameter settings:
• f703 =0 Frequency monitor display
Frequency-related parameters
• f703 =1 Frequency monitor display
Frequency-related parameters
Adjustment range
0.00: Free unit display disabled (display of
frequency)
0.01-200.0
0: All frequencies display free unit conversion
1: PID frequencies free unit conversion and fc
range change(0.0 ～fh )
0: Negative inclination (downward slope)
1: Positive inclination (upward slope)
0.00-
Operation frequency command, Operation
frequency, PID feedback, Frequency command
value (PID-computed), Operation frequency
command at trip
, ,  , vl,   - ,
, , , , f171
, , , ,
, , , ,
, , , -,
, , , 
PID feedback, Frequency command value (PID-
computed)
, , , , , ,
, 
F-76
E6581381
Default setting
0.00
0
1
0.00