Toshiba TOSVERT VF-FS1 Instruction Manual page 102

Assigning one function to an output terminal
Terminal
symbol
RY - RC
(A, B, C ）
When assigning one function to RY-RC terminals, set parameter  only.
Do not change but leave parameters  and  as they were set by default.
(Default setting:  =255,  =0)
6.3.4
 : Output terminal selection 1A (RY-RC)
 : Output terminal selection 1B (RY-RC)
 : Output terminal logic selection (RY-RC)
6
• Function
Title
Output terminal selection 1A

FL
Output terminal selection 3

Assigning two functions to an output terminal
2 different functions can be assigned to the terminal board output terminal RY-RC.
Signals of 2 functions of the logical product (AND) or logical sum (OR) selected form 58 functions can
be output to 1 output terminal.
Function Adjustment range
( ⇒ See page K-17)
F-10
E6581381
Default setting
4 (Low-speed
0-255
detection signal)
10(Failure FL)