Toshiba TOSVERT VF-FS1 Instruction Manual page 59

[Parameter setting]

How to use the wizard function
Key operated
4
How Parameters of Quick setting wizard
Title Function
Wizard function
LED display


MODE
ENT 
( ) ****

Parameter
display
MODE
↓

MODE
↓

↓
MODE

Title Function
Automatic

acceleration/deceleration
Acceleration time 1

Deceleration time 1

Lower limit frequency

Upper limit frequency

Motor thermal protection

Meter adjustment

V/F control mode selection

Base frequency 1

Base frequency voltage 1

Adjustment range
The wizard function refers to the
special function of calling up ten
frequently used parameters.
Displays the operation frequency (operation stopped).
(When standard monitor display selection = [Operation
frequency])
The first basic parameter "" (Wizard function) is displayed.
Press the ENT key to confirm your choice. The first parameter in the
purpose-specific wizard parameter group is displayed. (See Table below)
After moving to the purpose-specific wizard parameter group, change the
setting of each parameter by pressing the
 is dialyzed on completion of the setting of the wizard parameter
group.
Press the MODE key to exit the wizard parameter group.
By pressing the MODE key, you can return to the default monitoring mode
(display of operation frequency).
D-8
E6581381
Default setting
Operation
or key and the ENT key.
-