Toshiba TOSVERT VF-FS1 Instruction Manual page 225

Table of output terminal functions 3
Function
Code
No.
53 PIDFN Inversion of signal in accordance of frequency
command (VIA)
54 MOFF Undervoltage detection
55 MOFFN Inversion of undervoltage detection
56 LOC Local/remote switching
57 LOCN Inversion of local/remote switching
58 PTC PTC thermal alarm
59 PTCN Inversion of PTC thermal alarm
60 PIDFB Signal in accordance of frequency command (VIB)
61 PIDFBN Inversion of signal in accordance of frequency
command (VIB)
62 VIAD Analog VIA detection
63 VIADN Inversion of Analog VIA detection
64 VIBD Analog VIB detection
65 VIBDN Inversion of Analog VIB detection
66 RCHO Over set frequency attainment signal
67 RCHON Inversion of over set frequency attainment signal
68-253 Disabled Invalid settings, always OFF (ignored)
254 AOFF Always OFF
255 AON Always ON
Function
Inversion of PIDF setting
ON: Undervoltage detected
OFF: Other than undervoltage
Inversion of MOFF
ON: Local mode
OFF: Remote mode
Inversion of LOC
ON: 60% and over the protection level by PTC
OFF: Normal condition
Inversion of PTC
ON: Frequency commanded by  or
OFF: Frequency commanded by  or
Inversion of PIDFB setting
ON: The value of VIA is equal to or higher than
 + 
OFF: The value of VIA is equal to or lower than
 - 
Inversion of VIAD setting
ON: The value of VIB is equal to or higher than
 + 
OFF: The value of VIB is equal to or lower than
 - 
Inversion of VIBD setting
ON: The output frequency is equal to or higher
than  + .
OFF: The output frequency is equal to or lower
than  - .
Inversion of RCHO setting
Invalid settings, always OFF (ignored)
Always OFF
Always ON
K-19
E6581381
Action
 and that by VIB show the same
value.
 and that by VIB show different
values.
11