Stack Select - Kyocera Mita FS-1800/N User Manual

>Stack Select
MENU
?
ENTER
ENTER
MENU
Selecting the Output Device
You can select whether printouts will be received by the face-down output
tray or to the face-up output tray. If an option sorter is installed, it can also
be selected.
1
Press the MENU key.
2
Press the or
appears.
Paper Handling >
3
Press the > key.
4
Press the or
>Stack Select
Face-down tray
5
Press the ENTER key. A blinking question mark (?) appears.
>Stack Select
? Face-down tray
6
Press the or
tray changes as shown below.
Face-down tray (Printer's face-down output tray) [Default]
Face-up tray
Option stacker (Displayed when option output device is
7
When the desired paper source displayed, press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
1-103
key repeatedly until Paper Handling >
key repeatedly until >Stack Select appears.
key to display the desired destination. The output
(Printer's face-up output tray) [Option face-up
tray required]
installed such as SO-60)
Using the Operator Panel