Selecting The Output Stack - Kyocera Mita WP31C Operation Manual

3.10.10 Selecting the Output Stack

4 4 4 4
Press the or
>Reset Type
Adjust
5 5 5 5
To reset all custom paper types, press the ENTER key. A question mark (?) appears.
>Reset Type
Adjust ?
6 6 6 6
Press the ENTER key. All customized paper types, including weight and duplex
printing capability, will be reset to the default. The display returns to Ready.
The Stack Select menu on the operator panel allows you to select either the face-down tray
or the face-up tray for the output stack. If an optional output device such as the sorter,
document finisher, or bulk stacker, is installed, it can also be selected as an output stack.
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Paper Handling >
3 3 3 3
Press the key.
4 4 4 4
Press the or
>Stack Select
Face-down tray
5 5 5 5
To change the output stack, press the ENTER key. A blinking question mark (?)
appears.
>Stack Select
? Face-down tray
6 6 6 6
Press the or
Face-down tray
Face-up tray
key repeatedly until >Reset Type Adjust appears.
key repeatedly until Paper Handling > appears.
key repeatedly until >Stack Select appears.
key to toggle through the following output stacks:
3-81
3.10 Paper Handling