Date And Time - Eaton Network Card-MS User Manual

Date and Time

You can set the card's date and time manually or set it to synchronize with the NTP server from the Setting
Time page (see Figure 37).
Figure 37. Setting Time Page
To set the date and time:
1. Click Time from the menu bar to open the Setting Time page.
2. To manually set the date and time, select Set manually and enter values in the Date and Time fields, and
click Save. Maximum drift is ±2 min/month.
3. To have the time automatically set by the Network Shutdown Module (NSM) or the Enterprise Power
Manager (EPM) , select Accept automatic update from NSM or EPM.
4. To synchronize the time with the NTP server, select Synchronize with NTP server. Selecting this option
enables a connection with a time server, available on either the company's internal network or the Web.
This server communicates GMT time.
Enter the IP address or host name of the time server.
l
Select the time zone for your geographic area from the list.
l
European Economic Community (EEC) countries only. Select European Daylight Savings Time. The time
l
automatically adjusts to summer and winter time changes.
Eaton Network Card-MS User's Guide P-164000100—Rev 1 www.eaton.com/powerquality
Configuring the Card
47