Copying The Call Sign - Icom IC-E80D Instruction Manual

Copying the call sign

D Copying the call sign memory contents
This function is convenient when editing or modifying a part
of the memorized call sign.
q During DV mode operation, enter call sign menu.
MENU CALL-S
(Push [MENU ]), (Push [ ](2)/[ ](8), then push [ ](5).)
w Push [ ](2) or [ ](8) to select "UR," then push [ ](5).
e Push [ ](2) or [ ](8) to select the desired call sign chan-
nel to be copied.
• U01–U60 are available.
• When "AUTO" is set to "EDIT R" item
r Push [ ](6) to select the call sign programming mode.
• The 1st digit of the selected call sign blinks.
t Modify the selected call sign as described in "Station call
sign programming" .
(p. 37)
y Push [ ](5) to store the modified call sign into the selected
blank channel.
Blank channel is selected
automatically.
DV MODE OPERATION
NOTE:
Make sure that the "EDIT R" (EDIT RECORD) item in DV
set mode is set to "AUTO" or "SEL" in advance.
NOTE: If no blank channel is available in the station call
sign memory, select the desired call sign channel number
as described in step u of "• When "SEL" is set to "EDIT R"
item" below.
• When "SEL" is set to "EDIT R" item
r Push [ ](6) to select the call sign programming mode.
• The 1st digit of the selected call sign blinks.
t Modify the selected call sign as described in "Station call
sign programming" .
(p. 37)
y Push [ ](5).
• Call sign channel number blinks.
u Push [ ](2) or [ ](8) to select the desired call sign chan-
nel to store.
i Push [ ](5) to store the modified call sign into the selected
channel.
7
(p. 134)
Call sign channel number
blinks.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
51