Accessing A Repeater - Icom IC-E80D Instruction Manual

5
REPEATER AND DUPLEX OPERATIONS

Accessing a repeater

q Set the receive frequency
w Set the shift direction of the transmit frequency.
DUP; see p. 32 for details.)
"DUP–"or "DUP" appears
e Push and hold [TONE](7) for 1 sec. to activate the subau-
dible tone encoder, according to repeater requirements.
• "T" appears.
Refer to p. 119 for tone frequency settings.
r Push and hold [PTT] to transmit.
• The displayed frequency automatically changes to the transmit
frequency (repeater input frequency).
• If "OFF" appears, check the frequency offset or shift direction.
(p. 32)
t Release [PTT] to receive.
y Push and hold [SQL] to check whether the other station's
transmit signal can be directly received or not.
30
.
(repeater output frequency)
(DUP– or
While receiving
T
While transmitting