Preliminary Steps; Removing The Ufm; Installing The New Ufm - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

System board and components

14.3.3.1 Preliminary steps

"Disabling or suspending BitLocker functionality" on page 69
Ê
"Disabling SVOM boot watchdog functionality" on page 70
Ê
"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê

14.3.3.2 Removing the UFM

"Removing the UFM" on page 370
Ê
Ê The UFM spacer remains on the system board.

14.3.3.3 Installing the new UFM

Figure 254: Preparing the new UFM
Ê Remove the nylon screw from the new UFM (1).
Ê Remove the UFM spacer (2).
372 Upgrade and Maintenance Manual
RX2540 M1