[1]
[2]
3) As you remove the bosses on both sides [1], lower the front part of the
power supply assembly [2]. Then pull it to remove the power supply
assembly.
3.5.1.13 Removing the Gear Unit
1) Remove the drive plate (small) [1].
- 2 screws [2]
2) Remove the 2 gears [1].
3) While freeing the claw, detach the gear unit [2].
[2]
3.5.1.14 Removing the Tooth-Missing Gear
1) Remove the gear support [1].
- 2 screws [2]
[3]
[2]
[1]
F-3-167
[2]
[1]
F-3-168
[1]
[2]
F-3-169
[1]
F-3-170
2) Remove the spring [1].
3) While freeing the claw, detach the tooth-missing gear [2].
3.5.2 Cassette Pickup Solenoid
3.5.2.1 Removing the Cassette
1) Remove the cassette by holding the cassette handle.
3.5.2.2 Removing the front cover
1) Open the front cover [1] and remove the arm claws [2] to disengage the
connection.
2) Remove the shafts on both sides [3] while warping the shaft arms inside,
0012-1649
and remove the front cover.
3.5.2.3 Removing the right cover
1) Remove the 2 screws [1] on the right cover.
0012-1650
2) Remove the right cover [1].
[1]
[2]
F-3-171
[2]
F-3-172
[3]
[1]
F-3-173
F-3-174
Chapter 3
[1]
0012-1656
0012-1657
[3]
[2]
0012-1658
[1]
3-27