System board components
10.3.3.5 Concluding steps
Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page
59.
Ê Reinstall and secure the server blade in the system unit as described in
section
"Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
238
65.
96.
Upgrade and Maintenance Manual
"Closing the server blade" on
60.
"Closing the rack
"Enabling
BX920 S3