10.3
Trusted Platform Module (TPM)
This section provides information on how to install, remove or replace the
Trusted Platform Module (TPM).
10.3.1 Installing the TPM
Field Replaceable Units (FRU)
Average hardware task duration: 5 minutes
Average software task duration: 5 minutes
10.3.1.1 Required tools
Preliminary and concluding steps:
●
– Phillips PH2 / (+) No. 2 screw driver
Installing the TPM:
●
– Bit screw driver
– TPM bit insert
(
)
*
For the Japanese market:
– TPM module fixing tool (S26361-F3552-L909)
10.3.1.2 Preliminary steps
Before installing the TPM, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê If applicable, open the rack door as described in section
door" on page
Ê Locate the desired server blade as described in section
defective server blade" on page
BX920 S3
(
)
*
70.
54.
Upgrade and Maintenance Manual
System board components
47.
"Disabling BitLocker
"Opening the rack
"Locating the
227