Upgrading Or Replacing A Processor; Concluding Steps - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 58.
Ê If necessary, remove the memory modules as described in section
"Removing a memory module" on page
Ê Remove the desired processor heat sink as described in section
processor heat sinks" on page
9.4.3

Upgrading or replacing a processor

Ê Remove the desired processor as described in section
processor" on page
Ê Remove the new processor as described in section
on page 186.
9.4.4

Concluding steps

Perform the following procedures to complete the task:
Ê Install the processor heat sink onto the processor as described in section
"Installing processor heat sinks" on page
Ê If memory modules have been removed, install the memory into their original
location as described in section
Ê Close the server blade as described in section
page 59.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê If available, update the system board BIOS and the iRMC to the latest
version as described in section
BIOS and iRMC" on page
BX920 S3
55.
206.
193.
"Installing a memory module" on page
65.
"Updating or recovering the system board
77.
Upgrade and Maintenance Manual
"Shutting down the
"Opening the server blade"
176.
"Removing a
"Installing a processor"
202.
"Closing the server blade" on
"Closing the rack
Processors
57.
"Removing
173.
60.
199