Switching On The Id Indicator - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

Basic software procedures

5.1.10 Switching on the ID indicator

When working in a datacenter environment, switch on the ID indicator on the
front of the server blade for easy identification.
Using the ID button on the front panel
Ê Press the ID button on the front panel to switch on the ID indicator.
I
When the ID button is pushed for five seconds or more and
separated, it lights to blue.
In addition, when the ID button is pushed again within one second,
NMI is issued.
I
For further information, refer to section
page 263.
Using management blade web interface
Ê Open the Components – System – Server Blades – Server Blade-x menu for the
desired server blade.
Ê Press the Locate button in the server blade status frame to switch on the ID
indicator.
Using ServerView Operations Manager
Ê In ServerView Operations Manager Single System View and press the Locate
button in the title bar to switch on the ID indicator.
76 Upgrade and Maintenance Manual
"Front panel indicators" on
BX920 S3