Saving Bios Settings; Saving Irmc Settings; Connecting Remote Storage To The Managed Server Blade - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

5.1.3

Saving BIOS settings

The description for saving the BIOS settings can be found in chapter „Save &
Exit menu" in the "D3142 BIOS Setup Utility for PRIMERGY BX920 S3"
reference manual.
For the Japanese market, follow the instructions provided separately.
5.1.4

Saving iRMC settings

Ê Enter the management blade web interface.
Ê Open the Components - System - Server Blade - Server Blade-x menu.
Ê Click the Remote Management button in the status frame of the server blade
menu.
The iRMC web interface opens, where you can administer the server blade
remotely.
Ê Open the iRMC S3 - Save Configuration.
Ê Click the Save All button in section of "Save iRMC S3 Firmware settings in
®
ServerView WinSCU XML format".
Ê Store the backup file in the system of the FST.
5.1.5 Connecting remote storage to the managed server
blade
The management blade web interface uses the iRMC Remote Storage function to
provide the server blade a "virtual" drive which is located elsewhere in the
network. This function can be used to boot a server blade from a remote DVD
drive or ISO file.
To start the Remote Storage function for the server blade proceed as follows.
Ê Enter the management blade web interface.
Ê Open the Components – System – Server Blades – Server Blade-x menu for the
desired server blade.
Ê Click the Video Redirection button in the status frame of the server blade
menu.
BX920 S3
Upgrade and Maintenance Manual
Basic software procedures
69