Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual page 125

Connection blade slots
CB1:
1Gb Ethernet or
Fabric 1
10 Gb Ethernet
CB3:
1Gb Ethernet or
10Gb Ethernet or
Fibre-Channel or
Fabric 2
CB5:
1Gb Ethernet or
10Gb Ethernet or
Fibre-Channel or
Fabric 3
SAS or
CB7:
1Gb Ethernet or
Fabric 4
Table 4: Fitting rules for connection blade slots
I
Connection blades within one fabric must have the same technology, i.e.
either Ethernet or Fibre Channel or Infiniband.
When installing the different types of mezzanine cards, make sure that
the slots in fabrics 2, 3 and 4 of the system unit are fitted with the
appropriate connection blades.
The following rules apply for fitting the mezzanine card slots of the server
blades:
If a 1 Gb Ethernet mezzanine card is installed in slot 1 of a server blade, at
●
least one 1 Gb Ethernet connection blade must be installed in fabric 2 of the
system unit.
If a 10 Gb Ethernet mezzanine card or a 10Gb CNA mezzanine card is
●
installed in slot 1 of a server blade, at least one 10 Gb Ethernet connection
blade must be installed in fabric 2 of the system unit.
BX920 S3
System unit
CB2:
1Gb Ethernet or
10Gb Ethernet
CB4:
1Gb Ethernet or
10Gb Ethernet or
Fibre-Channel or
Infiniband (CB3/4)
CB6:
1Gb Ethernet or
10Gb Ethernet or
Fibre-Channel or
SAS or
Infiniband (CB5/6)
CB8:
1Gb Ethernet or
Infiniband (CB7/8)
Upgrade and Maintenance Manual
Expansion cards and backup units
Server
blade
Onboard
CNA-
controller
Mezzanine
card 1
Mezzanine
card 2
Mezzanine card
- - -
Eth 1Gb 4port or
Eth 10Gb 2port
FC 8Gb 2port or
IB 40/56 Gb
2port
Eth 1Gb 4port or
Eth 10Gb 2port
FC 8Gb 2port or
SAS or
IB 40/56 Gb
2port
Eth 1Gb 4port or
IB 40/56 Gb
2port
125