Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual page 254

Server blade
I
Ensure to take note of the HDD/SSD modules mounting positions for
reassembly.
When the SAS backplane is used, remove the SATA backplane from the
standard server blade and install the SAS backplane to the server blade
as described in section of
page 115.
– If applicable, reinstall the HDD/SSD modules in their original mounting bays,
see section "Installing the 2.5-inch HDD/SSD module" on page
– Insert the server blade in the system unit see section
blade in the system unit" on page
– If available, update the system board BIOS and the iRMC to the latest
version as described in section
BIOS and iRMC" on page
– If available, restore the BIOS settings as described in section
BIOS settings" on page
– If available, restore the iRMC settings as described in section
iRMC settings" on page
I
In order to enable ServerView Operations Manager and ServerView
Installation Manager to identify the system, it is necessary to program the
chassis ID prom using the "ChassisIDProm Tool" after installing the new
Server Blade.
254
"Installing the HDD/SSD backplane" on
60.
"Updating or recovering the system board
77.
82.
82.
Upgrade and Maintenance Manual
106.
"Installing the server
"Restoring
"Restoring
BX920 S3