Swapping The Processor - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

System board components
Figure 106: Installing the system board (B)
Ê Secure the system board with the screw (M3 x 6 mm, C26192-Y10-C68)
(see circle).
I
Screw torque: 0.6 Nm (not applicable for the Japanese market)
Ê Verify the settings on the new system board (jumpers and/or switch).
I
For a detailed description, please refer to section
on page

10.5.4.2 Swapping the processor

Ê Carefully remove the processor from its socket on the defective system
board as described in
V
CAUTION!
Be careful not to touch or bend the pins on the processor socket!
I
Always replace the socket cover if you remove the processor from the
socket.
Ê Install the processor on the new system board as described in
"Installing processors" on page
I
Since the defective system board is sent back for repair, protect the
delicate processor socket springs with a socket cover.
248
259.
section "Removing processors" on page
184.
Upgrade and Maintenance Manual
"Onboard settings"
191.
section
BX920 S3