Indicators On The Hot-Plug Hdd/Ssd Module - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

12.3.2.3 Indicators on the hot-plug HDD/SSD module

Figure 114: Indicators on the 2.5-inch HDD module
1 HDD/SSD BUSY (green)
– Lights up: HDD/SSD in active phase
– Does not light: HDD/SSD inactive (drive inactive)
2 HDD/SSD FAULT (orange)
(in conjunction with a RAID controller)
– Does not light: no HDD/SSD error
– Lights up: HDD/SSD Faulty or Rebuild Stopped (drive defective,
needs replacing, a rebuild process was stopped or the HDD/SSD
module is not correctly inserted)
– Slow flashing: HDD/SSD Rebuild (the data is being restored after
changing a drive)
– Fast flashing: HDD/SSD Identify
BX920 S3
Upgrade and Maintenance Manual
Appendix
265