Concluding Steps; Software Configuration - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

System board components

10.2.3.5 Concluding steps

Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page 59.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê Enable boot watchdog functionality as described in section
watchdog functionality" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page

10.2.3.6 Software configuration

The UFM delivery set includes the "Recovery Tool CD" to setup the ESXi
configuration. Proceed as follows:
Ê Connect a remote DVD drive to the server blade as described in section
"Connecting remote storage to the managed server blade" on page
Ê Insert the "Recovery Tool CD" into the remote DVD drive and close the drive
tray.
Ê Switch on the server blade.
Ê The server blade should now boot from the "Recovery Tool CD".
Ê Follow the on-screen instructions.
226
65.
96.
Upgrade and Maintenance Manual
"Closing the server blade" on
89.
60.
"Closing the rack
"Enabling boot
"Enabling
69.
BX920 S3