Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual page 253

Ê Remove the processors from the defective server blade and install it into the
new server blade, see section
page 198.
Ê Install the heat sinks in the new server blade, see section
processor heat sinks" on page
Ê Remove the mezzanine cards carrier with the installed mezzanine card(s)
from the defective server blade, see section
on page 136.
Ê Remove the memory modules from the defective server blade and install it
into the new server blade and install it into the new server blade, see section
"Replacing memory modules" on page
Ê If an UFM is installed, remove it from the defective server blade and install it
into the new server blade, see section
Ê If an TPM is installed, remove it from the defective server blade and install it
into the new server blade, see section
Ê If an ROM1 SCU key is installed, remove it from the defective server blade
and install it into the new server blade, see section
Upgrade (ROM1 SCU key)" on page
Ê Install the mezzanine cards carrier into the new server blade, see section
"Installing mezzanine cards" on page
Ê If an FBU is installed, remove it from the defective server blade, see section
"Removing the FBU (Flash Backup Unit)" on page
Ê If an SAS RAID HDD module is installed, remove it from the defective server
blade and install it into the new server blade, see section
SAS RAID HDD module" on page
Ê If applicable, install the FBU in the new server blade, see section
the FBU (Flash Backup Unit)" on page
Ê Use the cover from the defective server blade and close the server blade,
see section "Closing the server blade" on page
Use the cover from the defective server blade because the COA label is
stuck there.
I
It is necessary to complete ID card with the model name and the serial
number. Please use the new label.
BX920 S3
"Upgrading or replacing processors" on
201.
151.
Upgrade and Maintenance Manual
"Removing mezzanine cards"
178.
"Replacing the UFM" on page
"Replacing the TPM" on page
"Onboard Controller SAS
239.
130.
156.
153.
59.
Server blade
"Handling
222.
236.
"Replacing the
"Installing
253