Onboard Indicators And Controls - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

Appendix

12.3.1.3 Onboard indicators and controls

Figure 111: Onboard indicators and Indicate CSS button
No. Description
1 Indicate CSS button
Using the Indicate CSS button
Ê Shut down the server blade as described in section
server blade" on page
Ê Remove the server blade from the system unit as described in section
"Removing the server blade from the system unit" on page
Ê Open the server blade as described in section
on page 58.
Ê Press the Indicate CSS button (1) to highlight defective components.
Component LEDs
I
The LEDs C to G are visible from the outside. All other LEDs are only
visible if the server blade has been opened. In order to access memory
LEDs (B), the air cowls need to be removed (see section
air cowls" on page
260
DIMM 1D
DIMM 2D
DIMM 1E
DIMM 2E
CPU 1
DIMM 2C
DIMM 1C
DIMM 2B
DIMM 1B
DIMM 2A
DIMM 1A
55.
182).
Upgrade and Maintenance Manual
DIMM 1F
DIMM 2F
CPU 2
"Shutting down the
"Opening the server blade"
SAS Connector
57.
"Removing the
BX920 S3