Concluding Steps - Fujitsu PRIMERGY BX920 S3 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
6.5.5

Concluding steps

Perform the following procedures to complete the task:
Ê Close the server blade as described in section
page 59.
Ê Reinstall and secure the server blade in the system unit as described in
section "Installing the server blade in the system unit" on page
Ê Reinstall the HDD/SSD drive as described in section
HDD/SSD module" on page
Ê If applicable, close the rack door as described in section
door" on page
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
116
104.
65.
96.
Upgrade and Maintenance Manual
"Closing the server blade" on
60.
"Installing a 2.5-inch
"Closing the rack
"Enabling
BX920 S3