Broadcast Key - Christie DS+5K User Manual

Downloaded From projector-manual.com Christie Manuals
DMX Channel
Base
Base + 1
Base + 2
Base + 3
Base + 4 Lens – Vertical * †
Base + 5 Lens – Horizontal * †
Base + 6 Lens – Focus * †
Base + 7 Lens – Zoom * †
Base + 8
Base + 9
* Functions are only active when the Slider Lock is set to Unlocked
† Lens functions have no effect on the Roadie 25k
NOTE: It is important to make sure the channels DO NOT overlap another device.
Example:
This option is used to name each device; some ArtNet servers support
DEVICE NAME:
querying for devices.
More information that is returned when a "device query" has
DEVICE DESCRIPTION:
been done.

Broadcast Key

Enter a checkmark if you want keypad commands sent to one projector to be relayed
to all projectors in a serial network. Note that the
the effect of a broadcast setting and allow you to control a specific projector when
necessary. Disable the setting for all but one (any) projector in a network.
Backlight
Toggle to turn the built-in keypad backlighting on and off.
Front IR / Back IR
As needed for your application, set to "any" so that the front and/or rear IR sensor
locations on the projector respond to the IR keypad. Set to "off" to disable.
Function
Shutter 65 – 192
193 – 255
0 – 254
Slider Lock
Input *
Channel *
1 – 254
1 – 254
1 – 254
1 – 254
Power * 1 – 254
None
Good Bad
Proj1_Base = 0 Proj1_Base = 5
Proj2_Base = 10 Proj2_Base = 9
Proj3_Base = 20 Proj3_Base = 11
Proj
Section 3: Operation
Value
0 – 64 Open
No Action
Closed
Locked
255 Unlocked *
1 – 8 Input #
1-99 Channel #
0 Lens Down
Stop
255 Lens Up
0 Lens Right
Stop
255 Lens Left
0 Negative Focus
Stop
255 Positive Focus
0 Zoom Out
Stop
255 Zoom In
0 Power Off
No Action
255 Power On
key will temporarily "override"
User's Manual 3-41
.