Broadcast Key; Front Ir / Back Ir; Wired Keypad; Test Pattern - Christie Roadster User Manual

System Configuration 
— GEOMETRY & COLOR —
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)

Broadcast Key

Enter a checkmark if you want keypad commands sent to one projector to be relayed
to all projectors in a serial network. Note that the
"override" the effect of a broadcast setting and allow you to control a specific
projector when necessary. Disable the setting for all but one (any) projector in a
network.
Backlight
Toggle to turn the built-in keypad backlighting on and off.

Front IR / Back IR

As needed for your application, set to "any" so that the front and/or rear IR sensor
locations on the projector respond to the IR keypad. Set to "off" to disable. To
disable both IR sensors, you cannot use the IR remote keypad to select the second
setting. This safeguard prevents accidentally disabling an IR keypad while you
OFF
are using it. Instead, use either the built-in keypad or a wired remote (optional) to set
the remaining active sensor to
remote keypad.
NOTE: Protocols B – G is used for rental staging applications.

Wired Keypad

The wired keypad is ON by default when connected to the rear of the projector. The
projector will then respond to incoming commands from this port. To disable the
wired keypad, you must use a different keypad—the built-in or an IR remote
keypad—to select "off". This safeguard prevents you from accidentally disabling the
wired keypad during use.
In the Configuration menu, select the
Geometry and Color submenu when
you need to modify overall color
performance and/or image geometry for
all sources.

Test Pattern

Choose the desired internal test pattern, or select OFF to turn off a test pattern.
Alternatively, use the
Test
Proj
. The projector will no longer respond to an IR
OFF
1.
 2.
3.
4.
5. Color Adjustments by X,Y
6.
7.
8. Default Color Adjustments
9. Intelligent Lens System (ILS)

Keystone and Warping if ChristieTWIST warping module is present
(standard in Matrix models, optional in all others).
key for cycling through test patterns.
key will temporarily
Geometry and Color
Test Pattern Grid
50.0
Keystone
Brightness Uniformity
Edge Blending
Color Saturation
Black Level Blending
Operation
3-49