Setting The Date/Time - Fujitsu fi-6010N Operator's Manual

4.5.5 Setting the Date/Time

1. Select the [System Settings] tab on the top menu.
2. Select the [Date/Time] tab on the left side menu.
⇒
The "Date/Time" screen appears, with a system date/time near to the current date/time
shown.
For Central Admin Console, only "Date Format" can be set.
3. Press the Date Format [List] button.
⇒
A date format drop down list appears.
4. Select a date format.
This date format is applied to the date/time when it is used to name scan data files and the
date shown on screens.
5. Enter the current date and time in the "Date/Time" input field.
The date and time shown are those current for when the "Date/Time" tab on the left side
menu was selected.
The date/time range that may be entered is from "January 1st 2001, 00:00:00" to "December
31st 2037, 23:59:59".
When entering a one digit number for date and time, such as for January, prepend "0" and
enter "01" in the input field.
4.5 Using the System Settings Menus
Central
Touch Admin
Admin
Panel Tool
Network Scanner fi-6010N Operator's Guide
4
55