Control Panel Messages
Table 5.2
Control Panel messages and corrective actions
Message
†
0001
-ESS
† Appears in the upper left
corner of the display.
†
0001
-BASE RAM
† Appears in the upper left
corner of the display.
†
0001
-BASE ROM
† Appears in the upper left
corner of the display.
†
0001
-ASIC
† Appears in the upper left
corner of the display.
†
0001
-TIMER
† Appears in the upper left
corner of the display.
Listed in Table 5.2 are Control Panel messages that either:
• Cause the printer to stop printing, or
• Require the user to call for service.
Also included in Table 5.2 are common, non-error
messages you are likely to see. The messages are listed in
alphabetical order.
Description/Corrective Action
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
A fault condition has occurred. Power OFF and Power ON the printer. If this
code appears again at Power ON, contact your Customer Support Center.
Control Panel Messages
Table 5.2 Page 1 of 24
Chapter 5: Troubleshooting
5-5