Xerox DocuPrint N3225 System Administrator Manual page 206

Control Panel Messages
Table 5.2 Control Panel messages and corrective actions (continued)
Message
Enter Password
_xxx
Env. Feeder Empty
Env. Feeder Fail
Power Off/On
Fan Failure
Power OFF NOW!
Finisher Failure
Power Off/On
Fin Fail H5-81
Power Off/On
Fin Fail H5-82
Power Off/On
Fin Fail H5-83
Power Off/On
Fin Fail H5-84
Power Off/On
5-14 System Administrator Guide
Description/Corrective Action
This message appears when using the Password Menu. From this menu, the
Job Menu can be accessed in order to release jobs for printing. Enter a valid 4
digit password using the Control Panel keys.
The Envelope Feeder is no longer being used to print because it is empty.
Refill the Envelope feeder if it is to be used again.
The Envelope Feeder has failed. Printing from the 100 Envelope Feeder
cannot continue. Power OFF the Printer. Remove and re-install the 100
Envelope Feeder following the instruction beginning on page 6-33. Power
ON the printer. If it still fails, contact your Customer Support Center.
The fan is not working. Power OFF the printer immediately and contact your
Customer Support Center.
Problem with Finisher elevator, stackers, or compiler tray. Power OFF and ON
the printer.
Problem with Finisher eject clamp. Power OFF and ON the printer.
Finisher tamper home sensor problem. Power OFF and ON the printer.
Finisher stacker offset home sensor problem. Power OFF and ON the printer.
Finisher tray sensor problem. Power OFF and ON the printer.
Table 5.2 Page 10 of 24