Xerox DocuPrint N3225 System Administrator Manual page 113

Table 1.30 Reset Menu functions (continued)
Menu Item and Function
Disk Format
Format the Hard Disk Drive. The
available values are:
Yes
No*
Normally, this function is used only if
the disk has not been formatted
previously. Initiating this command on
a formatted disk will write over any
existing data on the disk.
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
Flash Format
Format flash memory. The available
values are:
Yes
No*
Keystrokes
1. Press Menu Up or Menu
Down until you see:
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
Down until you see:
4. Press Enter . During
formatting, you will see:
5. When the formatting is
complete, you will see:
1. Press Menu Up or Menu
until you see:
Down
2. Press Item Up or Item
Down until you see:
3. Press Value Up or Value
until you see:
Down
4. Press Enter . During
formatting, you will see:
5. When the formatting is
complete, you will see:
Chapter 1: Configuring the Printer
Using the Menu System
Display
Menus
Reset Menu
Reset Menu
Disk Format
Disk Format =
Yes
Disk Format
Please Wait...
Ready
Menus
Reset Menu
Reset Menu
Flash Format
Flash Format =
Yes
Flash Format
Please Wait...
Ready
Table 1.30 Page 4 of 4
1-105