Xerox DocuPrint N3225 System Administrator Manual page 127

Table 1.34 Custom Paper Size Examples.
Custom Desired
Paper Size Input Source
8 x 10 in. Multi Bypass
Feeder
8.5 x 11 in. Multi Bypass
Short Edge Feeder
Feed (SEF)
1. In the application, format the page for Letter size paper, setting the
margins to correctly position the image on 8 x 10" paper if overlaid
by Letter size paper.
2. Load the 8 x 10" paper in the Multi Bypass Feeder.
3. Set the Tray Menu "MBF Size" to Custom.
4. Set the "Custom Size" to Letter (8.5 x 11").
5. Set the "Tray Sequence" to a value that does not include the MBF
(or set it to Off).
6. Request "MBF" as the paper source and send the job to the printer.
1. In the application, format the page for Folio size paper (because Folio
is a short-edge feed size on this printer), setting the margins to
correctly position the image on the 11 inches to be used by this
paper.
2. Load the 8.5 x 11" paper into the Multi Bypass Feeder in the SEF
direction.
3. Set the Tray Menu MBF Size to Custom.
4. Set the Custom Size to Folio (8.5 x 13").
5. Set the Tray Sequence item to value that does not include MBF (or
set to Off).
6. Request MBF as the paper source and send the print job.
Chapter 1: Configuring the Printer
Using Custom Paper Sizes
Required Steps
1-119