Xerox DocuPrint N3225 System Administrator Manual page 186

Installing the Maintenance Kit
4-18 System Administrator Guide
Replace the three feedrolls. (Refer to Step 21 on page 4-15
31
if necessary.)
32 Replace and close all paper input trays.
33 Reattach the power cord to the printer.
34 To reset the Maintenance Kit counter:
• Power OFF the printer.
• Hold down keys
power ON the printer.
• Keep holding down keys
message
*IOT?*
• Then within five seconds after the message appears,
hold down keys
the next message
appears. This confirms the counter reset.
Reboot
• Reboot the Printer by powering OFF then Powering
ON.
and at the same time and
and until the
appears.
and at the same time until
Reset Completed - Please