Xerox DocuPrint N3225 System Administrator Manual page 286

Network laser printers
Hide thumbs Also See for DocuPrint N3225:
Table of Contents

Advertisement

Memory Modules
6-44
System Administrator Guide
Carefully pull out the locking clips to release the memory
4
module, then rotate it down 45° and lift it out of the
socket.
5
Replace the controller board and tighten the screws by
hand.
6
Reattach the GFI power cord to the printer.
7
Power ON the printer.
8
Print a Configuration Sheet (see page 3-91) and confirm
that the total system memory has been decremented in
the upper left section of the Configuration Sheet.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint n4025

Table of Contents