Index Of Control Panel Messages - Xerox Phaser 6120 Service Manual

Index of Control Panel Messages

Standard Status Messages
Normal state messages are displayed on the upper line of the LCD.
Message
READY
WARMING UP
INITIALIZING
ENERGY SAVER
CANCELLING JOB
PROCESSING
PRINTING
(XXX/XXX)
IMAGE ADAPT
QUALITY DOWNGRADE
FIRMWARE UPDATE
WRITING IMAGE
FIRMWARE UPDATE
FORMATTING
UPDATE FIRMWARE
READING IMAGE
STARTING SYSTEM
FIRMWARE IMAGE
CALIBRATING
Warning Messages
Message
IMAGING UNIT LOW
CYAN LOW
MAGNETA LOW
BLACK LOW
YELLOW LOW
DISK NEAR FULL
Phaser® 6120 Color Laser Printer Service Manual
Description
Ready to print
Warming up
The printer is being initialized.
Energy Saver mode
Canceling a job
A print job is being processed.
The machine is printing with the collating function.
The firmware is being updated.
Calibrating
Whenever you replace a toner cartridge or reboot the printer after making an
temperature/humidity environmental change, the printer automatically
pauses to do an Automatic Image Density Control (AIDC) cycle. This process
is provided to make reliable printer operation with optimum output quality
possible.
Description
This message is displayed when the usage becomes 4% or under.
This is displayed when the usage becomes 4% or less for 4.5K cartridge and
12% or under for 1.5K cartridge. And this status is cleared when the usage
becomes 0%.
This is displayed when the usage becomes 4% or less for 4.5K cartridge and
12% or under for 1.5K cartridge. And this status is cleared when the usage
becomes 0%.
This is displayed when the usage becomes 4% or less for 4.5K cartridge and
12% or under for 1.5K cartridge. And this status is cleared when the usage
becomes 0%.
This is displayed when the usage becomes 4% or less for 4.5K cartridge and
12% or under for 1.5K cartridge. And this status is cleared when the usage
becomes 0%.
The hard drive is nearly full.
3-6
Index of Control Panel Messages