Xerox DocuPrint N3225 System Administrator Manual page 279

Set the controller board down on a flat surface. Align the
5
drive with the posts and connector, then push down on
the drive until all four corners latch into place.
6 Replace the controller board and tighten the screws by
hand.
7 Reattach the GFI power cord to the printer.
8 Power ON the printer.
9 Print a Configuration Sheet (see page 3-91) and confirm
that the Password Menu appears on the Configuration
Sheet.
Chapter 6: Installing and Removing Printer Options
Hard Disk Drive
6-37